Measuring batting parameters in cricket: A two-stage regression-OWA method

The selection of cricket players by team selectors and sponsors for endorsement of products is primarily dependent on the performance of players in terms of various parameters in their areas of expertise such as batting or bowling. This paper proposes a two-stage method for measuring and ranking batting parameters in cricket using ordered weighted averaging (OWA) operator and regression. The first stage measures the performance of batsmen using OWA operator followed by ranking of batting parameters using regression. The study reveals that the ranking obtained for batting parameters is not sensitive to changes in the OWA weights. A real dataset of 40 batsmen from Indian Premier League 2011 is considered for analysis purpose. Although this paper focuses only on the batting discipline the results from this paper can be extended to investigate bowling discipline using multiple parameters. These results can be implemented to enhance the quality of decision making.     

基于分段加权的反向稀疏跟踪算法研究

为提高稀疏表示跟踪模型性能，提出一种分段加权的反向稀疏跟踪算法，将跟踪问题转化为在贝叶斯框架下寻找概率最高的候选对象问题，构造不同的分段权重函数来分别度量候选目标与正负模板的判别特征系数。通过池化来降低跟踪结果的不确定性干扰，选择正负模板加权系数差值最大的候选表示作为跟踪结果。实验表明，在光照变化、遮挡、快速运动、运动模糊情况下，所提出的算法可以确保跟踪结果的准确性和鲁棒性。     

结构化加权稀疏低秩恢复算法在人脸识别中的应用

针对训练样本或测试样本存在污损的情况，提出一种结构化加权稀疏低秩恢复算法（structured and weighted-sparse low rank representation，SWLRR）。SWLRR对低秩表示进行加权稀疏约束和结构化约束，使得低秩表示系数更加趋近于块对角结构，进而可获得具有判别性的低秩表示。SWLRR将训练样本恢复成干净训练样本后，再根据原始训练样本和恢复后的训练样本学习到低秩投影矩阵，把测试样本投影到相应的低秩子空间，即可有效地去除测试样本中的污损部分。在几个人脸数据库上的实验结果验证了SWLRR在不同情况下的有效性和鲁棒性。     

基于多尺度多任务卷积神经网络的人群计数

在智能监控领域，实现人群计数具有重要价值，针对人群尺度不一、人群密度分布不均及遮挡等问题，提出一种多尺度多任务卷积神经网络（MMCNN）进行人群计数的方法。首先提出一种新颖的自适应人形核生成密度图描述人群信息，消除人群遮挡影响；其次通过构建多尺度卷积神经网络解决人群尺度不一问题，以多任务学习机制同时估计密度图及人群密度等级，解决人群分布不均问题；最后设计一种加权损失函数，提高人群计数准确率。在UCF_CC_50和World Expo'10数据库上进行了评估，验证了自适应人形核的有效性。实验结果表明：所提算法比Sindagi等的方法（SINDAGI V A，PATEL V M.CNN-based cascaded multi-task learning of high-level prior and density estimation for crowd counting.Proceedings of the 2017 14th IEEE International Conference on Advanced Video and Signal Based Surveillance.Piscataway，NJ：IEEE，2017：1-6）在UCF_CC_50数据库上平均绝对误差（MAE）数值和均方误差（MSE）数值分别降低约1.7和45；与Zhang等的方法（ZHANG Y，ZHOU D，CHEN S，et al.Single-image crowd counting via multi-column convolutional neural network.Proceedings of the 2016 IEEE Conference on Computer Vision and Pattern Recognition.Washington，DC：IEEE Computer Society，2016：589-597）相比，在World Expo'10数据库上所提算法的MAE值降低约1.5，且在真实公共汽车数据库上仅0~3人的计数误差，表明其实用性较强。     

长期演进系统基于加权平均时延的下行资源调度

针对长期演进（LTE）移动通信系统下行链路传输中多用户的实时（RT）与非实时（NRT）业务传输性能需求问题，提出一种基于用户加权平均时延的改进型的最大加权延时优先（MLWDF）资源调度算法。该算法在考虑信道感知与用户服务质量（QoS）感知的基础上引入反映用户缓冲区状态的加权平均时延因子，该因子通过用户缓冲区中待传输数据与已发送数据的平均时延均衡得到，使具有较大时延和业务量的实时业务优先调度，提升了用户的性能体验。理论分析与链路仿真表明，提出算法在保证各业务时延及公平性的基础上，提升了实时业务的QoS性能，在用户数量达到50的条件下，对比MLWDF算法实时业务的丢包率降低了53.2%，其用户平均吞吐量提升了44.7%，虽牺牲了非实时业务的吞吐量，但仍优于VT-MLWDF算法。实验结果表明，所提算法在多用户多业务传输条件下提升了实时业务的传输性能，并在QoS性能上明显优于对比算法。     

Precedence constrained TSP arising in printed circuit board assembly

Component placement sequencing is a challenging problem that arises in automated assembly of printed circuit boards. While for some placement machines all placement sequences are acceptable, in other cases some sequences are not allowed because of the shape of the placement head. In such cases, while the head moves down to perform a placement, it might damage a previously placed component, and the problem of determining a minimum cost and at the same time acceptable sequence leads to a Precedence Constrained Travelling Salesman Problem formulation. In this study, a solution procedure to such a formulation is developed and its implementation in a real PCB assembly environment is discussed.     

A Statistical Control Chart for Stationary Process Data

In the statistical process control environment, a primary method to deal with autocorrelated data is the use of a residual chart. Although this methodology has the advantage that it can be applied to any autocorrelated data, it needs some modeling effort in practice. In addition, the detection capability of the residual chart is not always great. This article proposes a statistical control chart for stationary process data. It is simple to implement, and no modeling effort is required. Comparisons are made among the proposed chart, the residual chart, and other charts. When the process autocorrelation is not very strong and the mean changes are not large, the new chart performs better than the residual chart and the other charts.     

CroMatcher: An ontology matching system based on automated weighted aggregation and iterative final alignment

In order to perform ontology matching with high accuracy, while at the same time retaining applicability to most diverse input ontologies, the matching process generally incorporates multiple methods. Each of these methods is aimed at a particular ontology component, such as annotations, structure, properties or instances. Adequately combining these methods is one of the greatest challenges in designing an ontology matching system. In a parallel composition of basic matchers, the ability to dynamically set the weights of the basic matchers in the final output, thus making the weights optimal for the given input, is the key breakthrough for obtaining first-rate matching performance. In this paper we present CroMatcher, an ontology matching system, introducing several novelties to the automated weight calculation process. We apply substitute values for matchers that are inapplicable for the particular case and use thresholds to eliminate low-probability alignment candidates. We compare the alignments produced by the matchers and give less weight to the matchers producing mutually similar alignments, whereas more weight is given to those matchers whose alignment is distinct and rather unique. We also present a new, iterative method for producing one-to-one final alignment of ontology structures, which is a significant enhancement of similar non-iterative methods proposed in the literature. CroMatcher has been evaluated against other state-of-the-art matching systems at the OAEI evaluation contest. In a large number of test cases it achieved the highest score, which puts it among the state-of-the-art leaders.     

A Multivariate EWMA Controller for Linear Dynamic Processes

Most research of run-to-run process control has been based on single-input and single-output processes with static input–output relationships. In practice, many complicated semiconductor manufacturing processes have multiple-input and multiple-output (MIMO) variables. In addition, the effects of previous process input recipes and output responses on the current outputs might be carried over for several process periods. Under these circumstances, using conventional controllers usually results in unsatisfactory performance. To overcome this, a complicated process could be viewed as dynamic MIMO systems with added general process disturbance and this article proposes a dynamic-process multivariate exponentially weighted moving average (MEWMA) controller to adjust those processes. The long-term stability conditions of the proposed controller are derived analytically. Furthermore, by minimizing the total mean square error (TMSE) of the process outputs, the optimal discount matrix of the proposed controller under vector IMA(1,?1) disturbance is derived. Finally, to highlight the contribution of the proposed controller, we also conduct a comprehensive simulation study to compare the control performance of the proposed controller with that of the single MEWMA and self-tuning controllers. On average, the results demonstrate that the proposed controller outperforms the other two controllers with a TMSE reduction about 32% and 43%, respectively.     

A hybrid homogeneously weighted moving average control chart for process monitoring

Several modifications and enhancements to control charts in increasing the performance of small and moderate process shifts have been introduced in the quality control charting techniques. In this paper, a new hybrid control chart for monitoring process location is proposed by combining two homogeneously weighted moving average (HWMA) control charts. The hybrid homogeneously weighted moving average (HHWMA) statistic is derived using two smoothing constants λ₁ and λ₂ . The average run length (ARL) and the standard deviation of the run length (SDRL) values of the HHWMA control chart are obtained and compared with some existing control charts for monitoring small and moderate shifts in the process location. The results of study show that the HHWMA control chart outperforms the existing control charts in many situations. The application of the HHWMA chart is demonstrated using a simulated data.